• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Recent content by Scholar

  1. S

    Spindle Moulder Fence material

    Thanks for all the comments thus far. The problem has come to light because I am making some t-track inserts that will locate in the web of the extruded plates - these will allow the fitting of a sacrificial board inserted flush between the two plates, rather than adding to the depth. (To be...
  2. S

    Spindle Moulder Fence material

    Hello All I am pondering the spindle moulding fence set up on my Hammer B3 Saw/Spindle Moulder. The fence plates consists of two aluminium extruded sections that are secured to the spindle moulding hood by a T-slot in the rear. I ordered a new set of fence plates from Felder and have been...
  3. S

    Building your own kitchen cabinets?

    It is a little while since I have made many cabinets, but a few points about how I have gone about it. I really need to get round to a long overdue kitchen. - I get all the panels cut to size with a panel cutting service - I am not sure it adds much cost and it saves a huge amount of effort...
  4. S

    Sticking wood glazing bars

    Yes, sorry , he does say that the groove runs out through the M&T joint - I had not picked that up somehow, but explains what i found a bit puzzling. Your explanation of the British Standard (I couldn’t find this) makes sense to me. Incidentally, I like the look of a projecting bottom bead...
  5. S

    Sticking wood glazing bars

    I suppose with the capping sealant, it is really a sort of hybrid glazing system that Ollie shows. The ones I have been refurbishing have the old butyl tape seal between glass and beading (inside and out) and the void between the edge of the unit and the frame is filled with a set mastic (I...
  6. S

    Sticking wood glazing bars

    I have been refurbishing some windows and this has involved cutting out and replacing the middle and bottom glazing beads as they have deteriorated somewhat - but most particularly the glazing sealant has deteriorated and become unsightly. The sealant was a butyl tape (I think Arboseal) and is...
See more
Back
Top