• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Interpreting Festool manual

justaskin

justaskin

New Shoots
Joined
Jul 23, 2014
Messages
180
Reaction score
0
Location
Shenley Church End MK(the legion of the lost)
On page 24 of the Kapex 120 manual, using the 4 cut method of testing angles. A statement says "The factory calibration threshold is ± 0.16°" .
My quandary is this their setting limit for one or all four of the angles ie ( 0.16° or 0.04° each). Being a German company they know what they mean but it doesn't come over like that, 0.04° of a degree that is one hell of a tolerance.
As the formulae is for four cuts I assume 0.16° is the correct, but I wouldn't put a bet on it.

Richard
 
You must log in or register to reply here.
Back
Top