• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Recent content by riclepp

  1. R

    Stuck Spindle block

    Hi All Hoping for some advice. I have a sip spindle moulder, and I have the cutter block stuck on the spindle itself and it won't budge. I have used plus gas and a hub puller to no avail. I am going to make a moveable triangle to the hub puller has something to bit on as the block it rounded...
  2. R

    Wanted :- HVPL Paint sprayer

    I am after a reasonably priced paint sprayer HVLP Fuji, Earlex or apollo. Would much prefer constant bleed type of gun. Many thanks.
  3. R

    Woodburner

    Anyone selling one. I am in Essex and willing to travel a little distance. Cheers.
  4. R

    Notice Board

    Morning all Got a question. I have to make a 3m x1.5m notice board out of cherry. The top and bottom of the notice board are 1.5m plus the tennon sections, these are to be mitred and biscuited in the corners. The client don't want MDF (cool). I have the cherry the frame is going to be 100mm...
  5. R

    Wood ID Please

    I was asked to send someone two pieces of oak. What they thought was oak (the door) which is not oak. Can any one help in iding the door weneer plase. I'm thinking of a birch but am proberly wrong. I have been advised on another site that it might be cherry. (btw, i did not see the door until I...
  6. R

    TH410 Thicknesser Powercord

    Hi All I am really struggling to find where I can buy the 16am powercord plug end and the socket that sits on the machine. Axminster are not helpful to say the least. I know there is an issue in that area as the machine does not run via the 16amp cable. So if anyone knows where I can...
  7. R

    Tonk Strips

    Hi All Does anyone have a good and reputable outlet for Tonk Strips I have looked at Issac Lords and I'm am looking at around £23/ £24 per strip. I am just wondering if there is anywhere a little cheaper, but not cheap and nasty. Many thanks for any help.
  8. R

    spring latches/bolts?????

    Hi All Not sure what the things are, but I am hoping that one of you decent chaps may be able to point me in the right direction. I am looking for some spring loaded catches/bolts. The ones you pull and let go and they return back into the hole.....no idea what they are called. Thanks in...
  9. R

    Wood/Letter Carving

    Hi I was wondering if it were possible for a Wood/Letter Carving section, or what the mods think about this. I do feel it is a specilisum and could be a massive benefit to all (espically to me just getting into it in a small way). I am sure there are pleanty of super dupper carvers on here...
  10. R

    SWMBO being nice ---- What's the catch???

    I know that I can be a pain at times, just as every other married couple. My wife has been aware of my need for some new toys!! Well over the last week I have recieved a Mirka Ceros 2 system including the vac and today parcel arrived with 14 Ariou Letter Carvin Chisels in and some other bits...
  11. R

    Wood Carving Chisels/gouges

    I am getting into carving and require some of the sharp cutting implements. Would rather a set. If you have anything you want to offload, drop me a pm. Many thanks
  12. R

    Screwsline

    Screwsline, do not seem to be trading at the moment. There is an message on their phone. It does state they will be up and running mid August 2014, but alas they don't seem to be. Does anyone know them and can shed any light? Cheers
  13. R

    Evening all again :)

    Thanks for the invite and it is really great to see the site up and running again :) Thank you to all who put the hard work in.
See more
Back
Top